I was stuck on a seized exhaust manifold bolt for three hours until I tried this kit. The self-centering tip drilled straight in and the extractor gripped tight on the first try. Saved me from having to take the whole manifold to a machine shop. - Dave R.
Finally found extractors that dont break off inside the bolt like those cheap spiral ones. Used the drill-out bit on a grade 8 bolt that had me stumped all morning and it came right out. Worth every penny for the peace of mind. - Carlos M.
This kit handled a stripped Torx screw that had me ready to throw tools across the shop. The X-Out bit grabbed it without any drilling and backed it right out. My apprentice was amazed how easy it looked. - Tom K.
Grabit® Pro Master Extractor 10 Piece:
Self-Centering, Ultra Durable, Pro Grade
- ✓ Pulls out any broken bolt or stripped screw without drilling off-center
Made with double-tempered M2 HSS steel that won't snap inside the hole
Works on grade 8 bolts and hardened fasteners without damaging threads
Remove any stuck fastener in minutes or your money back
Fast Shipping
Easy Returns
24/7 Support
Stop Letting Broken, Seized Fasteners Ruin Your Job Every Day
Watching Your Drill Walk Off-Center
Your bit skitters across the bolt, gouging expensive metal around it with that sickening screech.
Hearing Your Cheap Extractor Snap
That sharp crack when your discount extractor breaks inside the bolt, turning a fixable problem into a nightmare.
Staring At Rounded-Off Bolt Heads
Vise-grips polished that hex head into a smooth, shiny, impossible blob that nothing can grip.
Smelling Burnt Metal After Hours
That acrid, metallic stench fills your shop after your tenth failed heating attempt still leaves it seized.
Calling Your Client With Bad News
Admitting the five-minute job became a six-hour disaster because one stubborn fastener won't budge out.
Feeling That Sinking, Helpless Panic
All your tricks failed, your reputation is bleeding, and you're staring at an impossible deadline.
Say Goodbye To Broken Bolts That Stop Your Whole Job
Meet The Alden Master Extractor Kit: The Tool That Gets Stuck Bolts Out Everytime
Imagine getting a seized bolt out in five minutes instead of spending half your day trying to drill around it or weld a nut on top.
This kit has three different tools that handle every stuck fastener problem you run into.
The Drill-out bits stay dead center so you don't walk all over expensive parts. The Micro Grabit bits pull out tiny screws without destroying the threads. The X-Out bits grab stripped screw heads without any drilling at all.
They're made from M2 HSS steel so they don't snap when you need them most.
Stop wasting time on one stubborn bolt. Get it out clean and move on with your day.
Get Any Broken Fastener Out In 3 Easy Steps
Step 1 - Pick & Drill
Pick the right bit and drill straight in without walking or scratching.
Step 2 - Reverse
Flip your drill to reverse and watch it grip tight and turn.
Step 3 - Feel Relief
Feel the stuck bolt pop free so you finish the job fast.
Why You Will Love The Alden Master Extractor Kit
No More Drilling Off-Center and Destroying Expensive Components
You're drilling into that snapped-off bolt and the bit starts wandering across the metal.
Now you've gouged the threads and turned a simple extraction into a complete rebuild.
Regular extractors force you to center punch and grind a flat surface first, but your hand still shakes and the bit walks off-center the moment you apply pressure.
Our self-centering drill tip locks onto the break point and stays perfectly centered without any setup. The unique tip design grips jagged, uneven breaks automatically.
Extract broken bolts cleanly without damaging a single thread around them.
Never Snap Another Extractor Off Inside The Bolt Again
You're applying torque to remove the seized bolt and your cheap extractor snaps off inside the hole.
Now you have a hardened steel splinter jammed in the problem, making everything ten times worse.
Standard extractors are made from soft steel that can't handle the torque needed for grade 8 bolts. They twist, bend, and shatter under real-world pressure.
Our extractors are double-tempered M2 HSS steel with serrated edges that grip harder without breaking.
Built to handle maximum torque on the hardest fasteners. Remove seized grade 8 and 10.9 class bolts with confidence. Your tool stays intact no matter how stubborn the fastener.
Stop Wasting Hours Trying Multiple Failed Solutions
That single broken bolt has killed your entire afternoon.
You've tried heat, penetrating oil, vise-grips, and three different cheap extractors, and you're still stuck with the same problem.
Most extractor sets only handle one specific type of damage, forcing you to own multiple incomplete kits and waste time switching between failed approaches.
Our complete kit handles every fastener problem - broken bolts, stripped screws, damaged heads - with the right tool for each situation.
Ten professional-grade extractors in one case. Solve any fastener problem in minutes instead of hours.
Remove Damaged Screws Without Drilling Anything
You've stripped out a Phillips head screw and now you're trying to drill it out.
The bit skates across the smooth head, scratching everything around it while the screw stays perfectly stuck.
Traditional screw extractors still require you to drill a pilot hole, which risks walking off the small screw head and destroying the surrounding surface.
Our X-Out damaged screw remover grips stripped heads directly - no drilling required.
Just apply pressure with your power drill in reverse and it bites into any damaged head shape.
Remove stripped Phillips, Torx, hex, and square drive screws instantly.
See What Our Customers Are Saying
"I've been a heavy equipment mechanic for 15 years, and this kit just saved my entire week. Had a snapped exhaust manifold bolt that was holding up a $200,000 bulldozer repair. Used the Drill-Out bit and it came right out - centered perfectly, no thread damage. What should've been a 3-day nightmare turned into a 20-minute fix. The self-centering tip is absolutely genius. Worth every penny when you're billing $150 an hour."
"I was skeptical because I've been burned by cheap extractor sets before. Bought three different “professional” kits that all snapped off inside the bolts, making everything worse. Figured this would be the same story. Boy was I wrong. The M2 steel actually lives up to the hype - removed a seized grade 8 bolt that had defeated everything else I tried. The serrated edges grip like nothing I've seen. Should've bought this years ago instead of wasting money on junk."
"This blows away every other extractor I've used. I had the Craftsman set, the Harbor Freight set, even tried those expensive European ones. They all either walked off-center or snapped under pressure. The Alden kit is in a different league - the Drill-Out bits stay perfectly centered and the X-Out remover actually grabs stripped screws without drilling. Finally threw away my collection of failed extractors. This is the only one I need now."
Why Alden 1007P Master Extractor Grabit® Pro 10 Piece Kit Is Superior To Alternatives
❌ Cheap Spiral Flute Extractor Sets
These snap off inside grade 8 bolts, making your problem ten times worse. Alden's M2 HSS steel won't break even on hardened fasteners.
❌ Vise-Grips & Pliers
They slip and round off bolt heads into smooth, impossible shapes. Alden's serrated ends grip tight and turn seized fasteners with maximum torque.
❌ Drilling & Re-Tapping Larger
This ruins original threads and leaves permanent damage you can't undo. Alden removes bolts cleanly without touching the surrounding threads.
Why Choose Us Over Other Brands
- ✓ Removes Broken Fasteners
- ✓ Self-Centering Drill Tip (No Walking or Wandering)
- ✓ Extracts Grade 8 & Class 10.9 Bolts
- ✓ Double-Tempered M2 HSS Steel
- ✓ 3-in-1 System (Drill-Out, Micro Grabit & X-Out)
- ✓ Made in USA with Lifetime Warranty
- ✓ Works on Jagged, Uneven Breaks
When To Use The Alden Master Extractor Grabit Pro
Seized Engine Bolts
Pull out snapped exhaust studs without drilling off-center and ruining your expensive manifold or block.
Stripped Deck Screws
Grab rounded Phillips heads that spin endlessly so you finish the deck repair today instead of next week.
Frozen Trailer Bolts
Remove rusted hitch bolts that snap mid-turn without calling a shop or welding makeshift solutions on-site.
Cross-Threaded Equipment Repairs
Extract broken fasteners from machinery without destroying threads so you avoid costly helicoil fixes or new parts.
Rushed Deadline Jobs
Turn a job-stopping broken bolt into a five-minute fix so clients never hear excuses about delays.
Corroded Marine Hardware
Pull salt-damaged screws from boat components that crumble apart the second you touch them with normal tools.
Who This Is Ideal For
Professional Mechanics
You work on vehicles daily and need broken fasteners removed fast without damaging expensive components or threads.
Auto Technicians
You handle high-stakes repairs where one stripped bolt can halt your entire workflow and cost you hours.
Equipment Repair Techs
You maintain industrial machinery where seized fasteners are routine and downtime directly impacts your shop's bottom line.
Serious DIYers
You tackle your own mechanical projects and refuse to let one broken bolt defeat you or force you.
Restoration Enthusiasts
You restore classic vehicles or equipment where every original component matters and drilling out threads isn't an option.
Trade Contractors
You work on plumbing, HVAC, or construction where corroded fasteners are inevitable and delays cost you money daily.
Why You Must Switch To Alden 1007P Master Extractor Grabit® Pro 10 Piece Kit Immediately?
Every project you delay switching, it affects you more than you realize.
Wasting billable hours on broken extractors that snap off inside the bolt, making the problem ten times worse.
Replacing expensive components because cheap tools walked off-center and gouged the housing beyond repair.
Losing sleep over missed deadlines while you struggle with vise-grips and penetrating oil that never works.
Starting each tough job with dread, knowing one seized bolt could turn your five-minute fix into a half-day nightmare.
Look, you deserve the confidence that no broken fastener can stop you.
That's why our Alden 1007P Master Extractor Grabit® Pro 10 Piece Kit exists.
At the end of the day, your reputation should be built on solving problems, not being defeated by them.
Choose Your Package Below
Great For Workshop And Mobile Work
Try It Risk Free For 60 Days Or Your Money Back
Order your Alden Master Extractor Grabit Pro Kit today, and try it for the full 60 days.
If you're not experiencing the smoothest, most effortless broken bolt removal of your life - pulling out even the most stubborn, seized fasteners without a single scratch to the surrounding metal - then contact us for a full refund.
No questions asked.
Your purchase is backed by a lifetime free replacement warranty.
So if any extractor breaks, dulls, or wears out during normal use, we'll send you a new one.
Frequently Asked Questions
Absolutely not. These are made from M2 HSS - the highest quality steel available - and tempered twice for extra hardness. Unlike cheap spiral flute extractors that snap under pressure, the Alden Grabit® system is engineered for multiple extractions per tool. The unique drill-and-extract design distributes stress evenly, so you get maximum breakout torque without tool failure.
Yes, this is exactly what the self-centering drill tip was designed for. The unique drill tip stays on center automatically - no walking, no wandering, and no center punching required. It works even on jagged, uneven, and rough breaks where other tools have failed. The serrated extracting end grips damaged metal that smooth extractors can't touch.
The Master Kit handles everything. You get the complete range: Grabit® Micro for screws #5-6 up to 1/4\", Grabit® Drill-Out for bolts up to 1/2\", and Grabit® X-Out for damaged screws #6-14. This single kit replaces dozens of individual tools and covers 99% of extraction situations you'll encounter.
These are proudly Made in the USA from M2 HSS steel - the same premium steel used in professional machine shops. No cheap imports, no mystery metals. M2 HSS is specifically chosen because it maintains its edge and strength under extreme torque, which is why we can offer a Manufacturer's Lifetime Warranty.
The X-Out uses aggressive cutting edges that bite into damaged screw heads (stripped Phillips, Torx, hex, etc.) and extract them using reverse rotation only. Simply apply downward pressure with your drill in reverse at slow speed. It works on screws that are completely rounded off because it cuts new grip points into the damaged head.
No. The self-centering design keeps you perfectly aligned with the original hole, and the controlled extraction process removes only the broken fastener - leaving threads intact and ready for a new bolt. No off-center drilling, no thread damage, no expensive re-tapping required. Your repair stays completely professional and invisible.
The kit includes a detailed removal chart and operating instructions that match each tool to specific screw and bolt sizes. Plus, the tools are clearly marked - Grabit® Micro #1-4 for small screws and bolts, Grabit® Drill-Out for larger bolts 5/16\" to 1/2\", and Grabit® X-Out #1-3 for damaged screw heads. Everything is organized in the included molded case so you can grab the right tool instantly.
Get Started Today & Join Thousands Of Happy Customers
Click Here To Add To Cart →
Self-Centering, Ultra Durable, Pro Grade