The Master Extractor Kit: Get Broken Bolts Out In Minutes With The Kit That Stays Centered, Grips Tight & Never Snaps
Stop Letting Broken, Seized Fasteners Ruin Your Job Every Day
Watching Your Drill Walk Off-Center
Your bit skitters across the bolt, gouging expensive metal around it with that sickening screech.
Hearing Your Cheap Extractor Snap
That sharp crack when your discount extractor breaks inside the bolt, turning a fixable problem into a nightmare.
Staring At Rounded-Off Bolt Heads
Vise-grips polished that hex head into a smooth, shiny, impossible blob that nothing can grip.
Smelling Burnt Metal After Hours
That acrid, metallic stench fills your shop after your tenth failed heating attempt still leaves it seized.
Calling Your Client With Bad News
Admitting the five-minute job became a six-hour disaster because one stubborn fastener won't budge out.
Feeling That Sinking, Helpless Panic
All your tricks failed, your reputation is bleeding, and you're staring at an impossible deadline.
Say Goodbye To Broken Bolts That Stop Your Whole Job
Meet The Alden Master Extractor Kit: The Tool That Gets Stuck Bolts Out Everytime
Imagine getting a seized bolt out in five minutes instead of spending half your day trying to drill around it or weld a nut on top.
This kit has three different tools that handle every stuck fastener problem you run into.
The Drill-out bits stay dead center so you don't walk all over expensive parts. The Micro Grabit bits pull out tiny screws without destroying the threads. The X-Out bits grab stripped screw heads without any drilling at all.
They're made from M2 HSS steel so they don't snap when you need them most.
Stop wasting time on one stubborn bolt. Get it out clean and move on with your day.
Get Any Broken Fastener Out In 3 Easy Steps
Step 1 - Pick & Drill
Pick the right bit and drill straight in without walking or scratching.
Step 2 - Reverse
Flip your drill to reverse and watch it grip tight and turn.
Step 3 - Feel Relief
Feel the stuck bolt pop free so you finish the job fast.
100% Secure Order & 30 Day Money Back Guarantee
Why You Will Love The Alden Master Extractor Kit
No More Drilling Off-Center and Destroying Expensive Components
You're drilling into that snapped-off bolt and the bit starts wandering across the metal.
Now you've gouged the threads and turned a simple extraction into a complete rebuild.
Regular extractors force you to center punch and grind a flat surface first, but your hand still shakes and the bit walks off-center the moment you apply pressure.
Our self-centering drill tip locks onto the break point and stays perfectly centered without any setup. The unique tip design grips jagged, uneven breaks automatically.
Extract broken bolts cleanly without damaging a single thread around them.
Never Snap Another Extractor Off Inside The Bolt Again
You're applying torque to remove the seized bolt and your cheap extractor snaps off inside the hole.
Now you have a hardened steel splinter jammed in the problem, making everything ten times worse.
Standard extractors are made from soft steel that can't handle the torque needed for grade 8 bolts. They twist, bend, and shatter under real-world pressure.
Our extractors are double-tempered M2 HSS steel with serrated edges that grip harder without breaking.
Built to handle maximum torque on the hardest fasteners. Remove seized grade 8 and 10.9 class bolts with confidence. Your tool stays intact no matter how stubborn the fastener.
Stop Wasting Hours Trying Multiple Failed Solutions
That single broken bolt has killed your entire afternoon.
You've tried heat, penetrating oil, vise-grips, and three different cheap extractors, and you're still stuck with the same problem.
Most extractor sets only handle one specific type of damage, forcing you to own multiple incomplete kits and waste time switching between failed approaches.
Our complete kit handles every fastener problem - broken bolts, stripped screws, damaged heads - with the right tool for each situation.
Ten professional-grade extractors in one case. Solve any fastener problem in minutes instead of hours.
Remove Damaged Screws Without Drilling Anything
You've stripped out a Phillips head screw and now you're trying to drill it out.
The bit skates across the smooth head, scratching everything around it while the screw stays perfectly stuck.
Traditional screw extractors still require you to drill a pilot hole, which risks walking off the small screw head and destroying the surrounding surface.
Our X-Out damaged screw remover grips stripped heads directly - no drilling required.
Just apply pressure with your power drill in reverse and it bites into any damaged head shape.
Remove stripped Phillips, Torx, hex, and square drive screws instantly.
100% Secure Order & 30 Day Money Back Guarantee
Why Alden 1007P Master Extractor Grabit® Pro 10 Piece Kit Is Superior To Alternatives
❌ Cheap Spiral Flute Extractor Sets
These snap off inside grade 8 bolts, making your problem ten times worse. Alden's M2 HSS steel won't break even on hardened fasteners.
❌ Vise-Grips & Pliers
They slip and round off bolt heads into smooth, impossible shapes. Alden's serrated ends grip tight and turn seized fasteners with maximum torque.
❌ Drilling & Re-Tapping Larger
This ruins original threads and leaves permanent damage you can't undo. Alden removes bolts cleanly without touching the surrounding threads.
Why Choose Us Over Other Brands
Removes Broken Fasteners
Self-Centering Drill Tip (No Walking or Wandering)
Extracts Grade 8 & Class 10.9 Bolts
Double-Tempered M2 HSS Steel
3-in-1 System (Drill-Out, Micro Grabit & X-Out)
Made in USA with Lifetime Warranty
Works on Jagged, Uneven Breaks
When To Use The Alden Master Extractor Grabit Pro
Seized Engine Bolts
Pull out snapped exhaust studs without drilling off-center and ruining your expensive manifold or block.
Stripped Deck Screws
Grab rounded Phillips heads that spin endlessly so you finish the deck repair today instead of next week.
Frozen Trailer Bolts
Remove rusted hitch bolts that snap mid-turn without calling a shop or welding makeshift solutions on-site.
Cross-Threaded Equipment Repairs
Extract broken fasteners from machinery without destroying threads so you avoid costly helicoil fixes or new parts.
Rushed Deadline Jobs
Turn a job-stopping broken bolt into a five-minute fix so clients never hear excuses about delays.
Corroded Marine Hardware
Pull salt-damaged screws from boat components that crumble apart the second you touch them with normal tools.
Who This Is Ideal For
Professional Mechanics
You work on vehicles daily and need broken fasteners removed fast without damaging expensive components or threads.
Auto Technicians
You handle high-stakes repairs where one stripped bolt can halt your entire workflow and cost you hours.
Equipment Repair Techs
You maintain industrial machinery where seized fasteners are routine and downtime directly impacts your shop's bottom line.
Serious DIYers
You tackle your own mechanical projects and refuse to let one broken bolt defeat you or force you.
Restoration Enthusiasts
You restore classic vehicles or equipment where every original component matters and drilling out threads isn't an option.
Trade Contractors
You work on plumbing, HVAC, or construction where corroded fasteners are inevitable and delays cost you money daily.
Why You Must Switch To Alden 1007P Master Extractor Grabit® Pro 10 Piece Kit Immediately?
Every project you delay switching, it affects you more than you realize.
Wasting billable hours on broken extractors that snap off inside the bolt, making the problem ten times worse.
Replacing expensive components because cheap tools walked off-center and gouged the housing beyond repair.
Losing sleep over missed deadlines while you struggle with vise-grips and penetrating oil that never works.
Starting each tough job with dread, knowing one seized bolt could turn your five-minute fix into a half-day nightmare.
Look, you deserve the confidence that no broken fastener can stop you.
That's why our Alden 1007P Master Extractor Grabit® Pro 10 Piece Kit exists.
At the end of the day, your reputation should be built on solving problems, not being defeated by them.
Try It Risk Free For 60 Days Or Your Money Back
Order your Alden Master Extractor Grabit Pro Kit today, and try it for the full 60 days.
If you're not experiencing the smoothest, most effortless broken bolt removal of your life - pulling out even the most stubborn, seized fasteners without a single scratch to the surrounding metal - then contact us for a full refund.
No questions asked.
Your purchase is backed by a lifetime free replacement warranty.
So if any extractor breaks, dulls, or wears out during normal use, we'll send you a new one.
100% Secure Order & 30 Day Money Back Guarantee
Frequently Asked Questions
Absolutely not. These are made from M2 HSS - the highest quality steel available - and tempered twice for extra hardness. Unlike cheap spiral flute extractors that snap under pressure, the Alden Grabit® system is engineered for multiple extractions per tool. The unique drill-and-extract design distributes stress evenly, so you get maximum breakout torque without tool failure.
Our Customers Love Us
Real reviews from verified buyers · TrustScore 4.6 / 5
Grabit in a controlled enviorment. I use "Grabit" pro in a kneemill to remove stripped screws from CNC tooling. using a 9/32 collet and a # "Grabit" proper for the screw size, I secure the tool in the vice with the screw as straight as possible. then align the drill tip side of the "Grabit" to the center of the stripped hole, we are drilling in reverse and at a slow speed. drill to a depth about equal to the length of the tip. flip the "Grabit" bit to the "Grabit" side move the tool into the hole pushing the tool firmly in the hole reverse the spindle again at a slow speed, this causes the tool to grab and reverse the screw out of the hole
Broken Fastener in tight engine bay. I had a 10mm bolt on a timing belt tensioner break inside the engine block. On top of that there was very little room to work on this issue. I tried a few bolt extractors from local hardware stores and none of them worked. I ordered the Grabit Micro kit and with in a few minutes I was able to pull out the broken fastener. This was truly the shot in the arm that I needed. I feel very confident in saying that with out this specific kit, I would have not been able to remove the bolt and most-likely would have had to have a shop perform the removal. The kit was worth every penny
The Ones to Buy!. Bits were shipped promptly, and worked flawlesly to extract several stripped Phillips head screws from wood door frames. They seem to be of very high quality and I have confidence that they will be equally effective in tougher applications such as automotive and other metal substrates
Grabit Works. The second the Grabit tool set arrived I put it too use and with in 5 minutes the stubborn screw body was removed. You keep going left and it will eventally come out, great tool "I Love It"
Five Stars!. Item arrived on time, exactly as ordered and in excellent condition. I would order from them again
Fast response--good product--fair…. Fast response--good product--fair price--unique store. Good transaction
100% Secure Order & 30 Day Money Back Guarantee
FAST DELIVERY IN 3-5 DAYS
We have a warehouse in New York to ensure the fastest delivery so you receive your order within 3-5 days!
SUPPORT A FAMILY BUSINESS
We’re a small family business & we care about our customers. Join our growing community of happy buyers
OUR CUSTOMERS LOVE US
We have served over thousands of happy customers over the years due to positive word of mouth