Finally got that stripped screw out of my MacBook without ruining the whole laptop. The tip grabbed right away where my regular bits just spun uselessly. Saved me a $400 repair bill! - Mike T.
My RC car had three different types of stripped screws and this one kit handled all of them. No more buying separate extractors for every project. Should have gotten this years ago. - Sarah M.
I was ready to throw away my drill after the screw head completely rounded out. This thing bit right in and pulled it out clean on the first try. Works exactly like they say it does. - Dave R.
Grabit® Micro Bolt Extractor 4 Piece:
Precise, Durable, Versatile
- ✓ Rated to remove screws and bolts as small as 3 mm. That's the smallest size any extractor is made for.
Made with dual-tempered M2 steel that stays sharp through multiple extractions
Safe for expensive electronics and delicate equipment without damage
Get your equipment working in minutes or your money back
Fast Shipping
Easy Returns
24/7 Support
Stop Letting Stripped Screws Ruin Your Repair Jobs Daily
Staring At Stripped Screw Heads
The screw head is completely rounded out, leaving you with no grip to turn it.
Snapping Bolts Clean Off
You apply just a bit more pressure and the bolt snaps, leaving the shaft stuck deep inside.
Drilling Through Multiple Broken Extractors
Your cheap extractor snaps inside the stripped screw, making the problem twice as bad.
Wasting Hours On One Stuck Screw
What should take 5 minutes turns into an all-day nightmare of failed attempts and frustration.
Damaging Expensive Equipment Around The Screw
Your drill slips and gouges the surrounding metal, creating costly damage to your precision equipment.
Abandoning Projects You Can't Finish
That RC car, laptop repair, or engine rebuild sits unfinished because of one impossible screw.
Stop Throwing Away Laptops And Gear Over One Stripped Screw
Meet The Grabit Micro: The World's Smallest Extractor That Pulls Out Stripped Screws Without Wrecking Your Equipment
Imagine taking out that stripped screw in your MacBook™ or RC car in 3 steps instead of staring at it for hours wondering what to do.
No more snapping off screw heads or watching your drill slip and gouge the metal around it.
Grabit Micro bites into stripped screws with tips that grip what smooth tools can't touch.
It works on tiny screws as small as 3mm in laptops and toys, plus bigger bolts up to 5/16 inch in appliances and cars.
Drill in, reverse your tool, and watch the stuck screw spin out clean without taking the rest of your equipment with it. One kit handles Phillips, Torx, Hex, and even those impossible Apple pentalobe screws.
Get That Stuck Bolt Out In 3 Easy Steps
Step 1 - Drill In
Drill into the stripped bolt head so the bit grabs tight.
Step 2 - Reverse & Extract
Switch your drill to reverse and let the precision-cut tip grip.
Step 3 - Bolt Comes Out
Watch the stuck bolt spin out clean without damaging the threads.
Why You Will Love The Grabit® Micro Broken Bolt Extractor Kit
No More Throwing Away Expensive Equipment Over One Stripped Screw
You're repairing your laptop and the tiny screw head strips completely.
Now that $2,000 MacBook™ is stuck half-disassembled because you can't remove one destroyed screw.
Standard extractors are too big for precision electronics and delicate equipment.
They're built for automotive work, not the microscopic fasteners in your expensive devices.
Our Grabit® Micro works on screws as small as 3mm and drills through any fastener type - even tamper-resistant pentalobe screws in Apple products. Save thousands in equipment instead of scrapping it over one impossible screw.
Stop Destroying Screw Heads When Regular Bits Can't Grip
Your screwdriver slips again and grinds away what's left of the screw head Each attempt makes it worse until there's nothing left to grab onto.
Regular drill bits and extractors have smooth surfaces that just spin uselessly against hardened or damaged fasteners without grabbing anything.
Our precision-cut end bites into the damaged fastener and creates massive torque that pulls out what smooth tools can't touch.
Remove the impossible screw on your first attempt instead of making it worse with every failed try.
Never Buy Another Extractor Set After This One Wears Out
You finally find an extractor that works, but after two jobs it's dull and useless.
Now you're ordering replacements constantly just to finish projects.
Most extractors are single-tempered and made from cheap steel that dulls quickly.
They're designed as disposable tools that fail after minimal use.
Our dual-tempered M2 high-speed steel is industrial-grade and handles multiple extractions without losing its edge.
One kit lasts for years of projects, backed by a lifetime warranty that replaces any worn bit free forever.
Fix Precision Equipment Without Specialized Tools for Every Screw Type
Your RC car has Phillips, hex, and Torx screws all in one assembly. You need three different extractors for three different stripped screws, and you only have one.
Traditional extractors are screw-type specific and useless when you encounter a different fastener design.
You end up buying multiple kits for different projects.
Our Grabit® Micro extracts Phillips, slotted, hex, Torx, tri-wing, Pozidriv, and even tamper-resistant screws with the same four-piece kit.
Handle any stripped fastener in toys, firearms, computers, appliances, or RC vehicles without buying tool after tool.
See What Our Customers Are Saying
"After struggling for 3 hours with a stripped pentalobe screw in my MacBook Pro, I was ready to take it to the Apple store and pay $400 for a motherboard replacement. Found this kit online and figured I'd try one last time. The #1 Grabit Micro bit grabbed that destroyed screw in seconds and pulled it right out. Saved me hundreds and finished the RAM upgrade myself. The serrated tip really does bite into metal that's completely smooth."
"I was skeptical because I've burned through so many cheap screw extractors that just snap off inside the bolt. Honestly thought this would be another waste of money. But when I stripped the hex bolt on my son's RC car differential, I decided to give it one more shot. This thing is built like a tank - the steel feels completely different from those flimsy hardware store extractors. It pulled out that mangled bolt without even slowing down, and after 6 months of use it still looks brand new."
"I've tried everything - EZ-Outs, left-hand drill bits, those spiral extractors from the auto parts store. They either break inside the screw or just spin uselessly. The Grabit Micro actually grips and pulls instead of just drilling a bigger hole. What makes this different is the dual tempering - you can feel how much harder the steel is compared to regular extractors. Finally removed the stuck bolt from my Glock frame that's been sitting in my parts box for two years because nothing else could grab it."
Why Alden Grabit® Micro Is Superior To Alternatives
❌ Drill Bits & Easy Outs
Drill bits just make bigger holes and easy outs snap inside stripped screws. Grabit® Micro grips and extracts without pre-drilling.
❌ Pliers & Vice Grips
Pliers slip off rounded heads and crush delicate parts around small screws. Grabit® Micro works on screws with no head left.
❌ Screw Extractors & Left-Hand Bits
Cheap extractors break inside the screw making problems worse. Grabit® Micro uses tool steel that extracts multiple times without breaking.
Why Choose Us Over Other Brands
- ✓ Removes Stripped & Broken Screws
- ✓ M2 HSS Tool Steel Construction
- ✓ Precision-cut Grip For 3X Torque
- ✓ Extracts Grade 8 Hardened Bolts
- ✓ Double-Tempered For Multiple Uses
- ✓ Lifetime Replacement Warranty
- ✓ Made In USA Quality
Where To Use The Alden Grabit® Micro Broken Bolt Extractor
Home Garage
Get stuck bolts out of your car engine without drilling bigger holes that wreck expensive parts.
Workshop Bench
Pull stripped screws from wood projects so you can finish the job instead of leaving ugly damage.
Computer Repair Desk
Remove tiny broken screws from laptops and phones that regular tools just spin and destroy further.
Gun Cleaning Station
Extract stuck screws from rifles without scratching metal or forcing parts that could crack under pressure.
RC Hobby Table
Save expensive car frames when tiny bolts snap off instead of buying whole new parts.
Appliance Repair Area
Free seized bolts from washers and fridges so you fix the real problem without replacing entire units.
Who This Is Ideal For
DIY Mechanics
You work on your own car and need to extract stripped bolts without damaging threads.
RC Hobbyists
You build and repair RC cars with tiny screws that strip easily during maintenance.
Computer Technicians
You repair laptops and electronics with delicate screws that break during disassembly and replacement work.
Gun Owners
You maintain your firearms and need precision extraction for small stripped screws without gunsmith costs.
Appliance Repairers
You fix household appliances and deal with rusted or stripped fasteners that won't budge normally.
Home Repairers
You tackle home projects and want to remove broken screws yourself without calling professionals.
Why You Must Switch To Alden Grabit® Micro Broken Bolt Extractor Kit Immediately?
Every project you delay switching, it affects you more than you realize.
Wasting money on replacement equipment when one stripped screw makes the whole thing unusable.
Buying cheap extractors that snap inside the damaged screw, making the problem twice as bad.
Staring at half-finished projects that sit abandoned because of one impossible fastener.
Starting repairs knowing you might destroy expensive equipment if the wrong screw strips.
Look, you deserve the confidence that any stripped screw can be removed safely.
That's why our Alden Grabit® Micro Broken Bolt Extractor Kit exists.
At the end of the day, precision repairs should save your equipment, not destroy it.
Choose Your Package Below
Try It Risk Free For 60 Days Or Your Money Back
Order your Grabit® Micro Broken Bolt Extractor Kit today, and try it for the full 60 days.
If you're not experiencing the smoothest, most effortless screw extractions of your life - pulling out impossible fasteners that would have ruined your expensive equipment - then contact us for a full refund.
No questions asked.
Your purchase is backed by a lifetime free replacement warranty.
So if any bit breaks, dulls, or wears out during normal use, we'll send you a new one free.
Just mail us the worn bit and we'll ship you a fresh replacement immediately.
Frequently Asked Questions
Absolutely! The Grabit® Micro is specifically designed for precision work and is the smallest bolt extractor made. It handles screws as small as 3mm and even works on tamper-resistant screws like pentalobe screws found in Apple MacBook products, making it perfect for electronics, computers, firearms and delicate equipment.
No worries at all! Every Grabit® Micro bit comes with a lifetime warranty. If any bit breaks or wears out, simply mail us the broken piece with your return address and \"Rallo Warranty Approved\" written on the envelope. We'll send you a brand new replacement immediately at no cost to you - we even pay the return postage.
Not at all! These are made from high-quality M2 HSS (High Speed Steel) tool steel and are tempered twice to achieve professional-grade hardness. They're industrial strength and designed for multiple extractions per tool. Plus, they can drill through grade 8 and 10.9 class fasteners - some of the hardest bolts you'll encounter.
Your standard variable speed drill will work perfectly! The Grabit® Micro is designed to be used in any variable speed reversible rotary power tool (at slow speed) or quality power screwdriver with an expandable chuck. Just remember to use slow speed and always reverse for best results.
Yes! The Grabit® Micro is specifically designed for broken bolts and stripped screws. The precision-cut end provides extra torque to grip and remove even the most stubborn fasteners, whether they're flush, below surface, or completely stripped of their original head shape.
The Grabit® Micro is engineered for precision work on expensive equipment. When used properly at slow speeds, it's designed to extract broken fasteners without damaging surrounding threads or materials. That's why it's trusted for delicate applications like electronics, firearms, and precision machinery.
The Grabit® Micro works on virtually any material! It easily extracts bolts and screws from wood, metal, plastic, and removes fasteners made of any alloy - including soft screws that are prone to stripping. Whether you're working on automobiles, RC cars, appliances, toys, or electronics, this kit handles it all.
Get Started Today & Join Thousands Of Happy Customers
Click Here To Add To Cart →
Precise, Durable, Versatile